Mitsubishi Electric PLA-RP35EA Service Manual page 37

(2) Rotation and back up operation
PAR-3xMAA ("x" represents 0 or later)
Main Main menu 3/3
Maintenance
Initial setting
Service
Main display:
Cursor Page
F1 F2 F3 F4
Service menu
Enter maintenance password
9999
Select:
Cursor
Service menu 1/2
Test run
Input maintenance info.
Function setting
Check
Self check
Main menu:
Cursor
Check menu
Error history
Refrigerant volume check
Refrigerant leak check
Smooth maintenance
Request code
Service menu:
Cursor
Request code
Ref.address 0
Request code 004
Request:
Cursor
OCH626A
Press the button.
1
Select "Service" with the [Cursor] buttons (
2
F4
), and press the
and
Enter the current maintenance password (4 numerical digits).
3
• Move cursor to the digit you wat to change with the
• Set each number (0 through 9) with the
(Note: The initial maintenance password is "9999".)
Then, press the button.
4
Select "Check" with the
5
F1
Select "Request code" with the
6
Set the Refrigerant address and Request code.
7
• Select the item to be changed with the
• Select the required setting with the
F4
Press the button to set the Refrigerant address "0".
8
F3
or
F4
Press the button to set the desired request code No.
9
F3 or
• Rotation & Back up operation: Enter one request code from 311–318.
• 2nd stage cut-in operation: Enter one request code from 321–324.
Press the button. Data will be collected and displayed.
0
F4
Press the button to set the Refrigerant address "1".
1 F3 or
Set above
9 0
– .
To return to the Main menu, press the
2
37 37
) or the [Page] buttons (
F1 and F2
button.
F1
or
F4
button.
F3 or
button, and press the
or F2
button, and press the
F1 or F2
button.
F1 F2
or
F4
button.
F3
or
button.
F3
button.
F2
button.
button.