Table of Contents
Advertisement
Chapter 4
Message
Error
code
e-Signature
#761
Certificate Access
Error
Check to see if the
#762
address is correct.
e-Certificate
#762
Validity error
e-Certificate
#766
Validity error
Check server
#801
Cannot find server #802
Check address
#804
Disk full on the
#805
Server
Check address.
#806
No message
#807
It is generated the
#808
error by the cause
of the servers end.
No connection
#815
4.3.7 NCP Transmission errors
<NCP transmission error message and error code list>
Message
Error code Cause
No message
#022
Transmission
#099/ #995 - Transmission cancelled by user.
cancelled
4-24
Cause
The encryption code used at time of PDF transmission (bearing
a user signature prepared by MEAP authentication) prevents
transmission.
e-mail is sent to an address for which transmission is not
permitted.
The period of validity of the certificate used for signature
transmission has passed.
The period of validity of the certificate used for signature
transmission has passed.
- Error generated due to cause on server side.
- In NetWare,a user exists but no read or write privileges.
- Transmission made to write-prohibited file of the same name.
- The IP address for DNS server is not set up.
- DNS Server is not running.
- No appropriate host name is found in the DNS server.
- No match for specified directory name.
- No access privileges for that directory.
- Wrongly specified user name.
- Wrongly specified password.
- In NetWare, the host name is incorrect.
No access rights for the specified directory
- Login is made from this unit in NetWare's Pserver mode
(NDS/ Bindery common) and login is attempted again for
NCP, while the server is printing.
Address deleted or invalidated during
transmission reservation.
Remedy
Install the appropriate user certificate or machine certificate
properly.
Check to see if the target of transmission is correct.
Check to see if the domain (in user mode) is one for which
transmission is permitted.
Do not transmit to an address for which transmission has not been
authorized..
Use a certificate whose period of validity is still good.
If necessary, set the time correctly.
Use a certificate whose period of validity is still good.
If necessary, set the time correctly.
- Reset server.
- Check server status and settings.
- Check the network traffic.
- Check the DNS server.
- Check that the destination directory name is correct.
- Set directory access privileges in the server.
- Send to different directory with access privileges.
-Document deletion of server
- Change address book user name or password.
- Check the access rights to the server.
-The server is reset.
- Wait a while and try again.
- Change the destination NetWare server.
- Stop Pserver.
T-4-9
Remedy
- Retransmit deleted address.
- Check that a group address is specified as the transfer destination and that it
contains a valid address.
- Check that a group address is specified as the transfer destination and whether
it contains local print or fax box only.
- Check whether the specified transfer destination address has been deleted.
Resend.
0020-7990
Advertisement
Table of Contents
