Overview Of Possible Errors - Canon Two-Knife Booklet Trimmer-A1 User Manual

Overview of possible errors

Introduction
When an error occurs in the trimmer, the printer operator panel displays a corresponding
message. The table below describes possible solutions for trimmer-related errors.
Illustration
[17] Error locations
Possible errors
Errors and solutions
Cause of error
The top cover is open.
The delivery tray is full.*
The trimmer waste box is full.
#
Overview of possible errors
Solution
Close the top cover (1).
Lift the E handle and remove the
booklets from the conveyor section.
Empty the trimmer waste box. If any trim
waste is left in the delivery chute, then
remove the trim waste.
Chapter 4 - Troubleshooting 25