When the following conditions are fulfilled, input from a USB keyboard is possible while the software keyboard is being displayed on the unit's touch panel.
- Service Mode Level 2 > Option > USER > USBI-DSP to "1"
- Additional Functions > System Settings > USB Settings > Use MEAP Driver for USB Input Device set ON
- A USB keyboard enabled for USB ports is connected to and recognised by the unit.
- Input is only accepted when the keyboard is being displayed on the unit's touch panel.
Restrictions
- A maximum of two USB keyboards or USB keyboard type card readers can be connected.
- Some non recommended keyboards will not work. (Recommended keyboard: Cherry G84-4100PTAUS)
- Keyboard input cannot be accepted into Web browser windows.