G3 Signal Transmission Test (G3 - Canon Super G3 2nd Line FAX Board-AM1 Service Manual

5
Service Mode Service Mode > Test Mode (TEST) > MODEM Test > G3 Signal Transmission Test (G3 Tx)
■ G3 Signal Transmission Test (G3 Tx)
Of the items indicated below, press one. In response, the DC circuit will be closed and the
selected frequency will be transmitted using the G3 signal transmission function of the
modem. You can also monitor the transmission signal by listening to the sound generated by
the speaker. To stop the operation and end test mode, press the
Sssw Menu Num Ncu Type
<MODEM> <G3TX>
300bps
2400bps
4800bps
7200bps
9600bps
TC7200
TC9600
12000bps
Sssw Menu Num Ncu Type
<MODEM> <G3TX>
14400bps
300-ALL0
300-ALL1
300-1:1
300-1:4
300-4:1
5 Service Mode > Test Mode (TEST) > MODEM Test > G3 Signal Transmission Test (G3 Tx) Service Mode
key.
ISDN Print Clear Test Report
<READY>
<1/2>
OK
F-5-17
ISDN Print Clear Test
Report
<READY>
<2/2>
OK
F-5-18
Caution:
'300-ALL0' through '300-4:1' are not currently supported.
5-22
5-22