Product Specifications; Operation Instructions - Riester ri-fox N Operator's Manual

Product specifications

1. Easy to use.
2. Small in volume, light in weight.
3. Low power consumption.
4. Low voltage warning will be indicated in visual window when battery voltage is low.
5. The product will automatically be powered off when no signal is registered for longer
than 8 seconds.

Operation Instructions

1. Install two AAA batteries into the battery cassette, and then close its cover.
2. Open the clamp as shown in the picture below.
3. Insert one finger completely into the opening of the pulse oximeter.
4. Press the power switch once on the front panel.
5. The patient's finger should remain still while the pulse oximeter is working.
6. Read corresponding data from display screen.
When you insert a finger into the Oximeter,
your nail surface must be upward.
- 6 -