Important information read prior to start-up • Dropping or hitting the camera against a hard surface. You have purchased a high quality Riester RCS-100, which • Exerting excessive force on the lens. has been manufactured according to the Directive 93/42 EEC and is subject to the strictest quality controls at all times.
(such as microwave ovens, TVs, video What to do before first use games, etc.). • Remove the Riester Camera System from the sales packa- • Do not use the camera near radio transmitters or high- ge and check that all parts are undamaged voltage lines.
The sleep mode serves to optimize battery life and is auto- 8.6 Parameter-Einstellungen • Low battery: white light flashing matically activated if the RCS-100 is not in operation. • Battery charging: white light is on The options are 2, 5, 10, 30 minutes or never.
• Right handed mode: left handed right handed User can set left / right handed operation mode according to their operating habits. • Preserve lens setting: 7.7 Records manager The system can be set to ‚default‘ mode or ‚record keeping‘ to enter the records management page.
Wifi-SD/SD on the file management page. Imaging using optics module otoscope (OT) The RCS-100 camera with otoscope lens is intended to cap- ture digital images and videos of the eardrum. It consists of: •...
10 Imaging using optics module general lens (GE) matoscope Focus Correction” in the Setting page, user can The RCS-100 camera with general lens has an object range reset the focus position (see the detail at section 8.6). The of 30 mm ~ 4 m, is intended to capture digital images and dermatoscope has a ruler that can measure the length of the video of mouth and throat.
Sie die Fokusleiste, um die Helligkeit des Bildes anzupassen. 13 Information about the device 3) Tap to select manual/auto focus. RCS-100 is a portable and multifunctional electronic imaging Tippen Sie auf um manuellen/automatischen Fokus zu wählen. When is selected, click on the position in the preview diagnostic system.
ELECTROMAGNETIC COMPATIBILITY cified by the RCS-100 parts and lines manufacturer 30 cm ACCOMPANYING DOCUMENTS ACCORDING TO (12 inch). Failure to comply may result in a reduction in the IEC 60601-1-2, 2014, Ed.
Page 11
Table 1 Guidance and manufacturer’s declaration – electromagnetic emissions The RCS-100 is compliance for each EMISSIONS test specified by the standard, e.g. EMISSIONS class and group. Emissions Compliance Electromagnetic environment-- guidance RF emissions Group 1 ...
Page 12
You are also welcome to request a provisional cost estimate from us free of charge. In case of a warranty claim or repair, please re-turn the Riester product with the completed warranty Card to the following address: Rudolf Riester GmbH Dept.
Need help?
Do you have a question about the RCS-100 and is the answer not in the manual?
Questions and answers