Periodic Maintenance - Canon imagepress C7000VPE Service Manual

Q.

Periodic Maintenance

Some parts of the machine must be checked and/or replaced on a periodic
basis to ensure a specific level of machine performance. These parts are
likely to affect the performance once they fail even in the absence of external
change or damage. Whenever possible, plan their replacement so that it will
coincide with a scheduled service visit.
Note: All periodic maintenance shown in the below table is for reference
purposes only and are subject to change without notice.
imagePRESS C7010VP/C6010VP/C6010 Service Manual for additional
information.
Table 38 – Periodic Maintenance Schedule
Part Name
Item
 Clean
Platen glass
Scanner rail
No. 1 to 3 mirror
Reflector
Standard white plate
Dustproof filter
Dustproof glass
Primary Charging wire
Pre-transfer Charging wire
Shield plate (primary
charging unit)
Developing assembly
bottom plate metal portion
Drum patch sensor
Developing cylinder
17 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to
change depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed
and customer handling of the equipment.
imagePRESS C7000VPe Service Guide
Main Unit Periodic Maintenance
Estimated Interval
 Replace  Lubricate












 

imagePRESS C7000VPe Service Guide
17
 Adjust
Only when reader is equipped
Only when DADF is equipped
Clean using lint free paper
Clean using lint free paper

Simultaneous replacement with
the Photosensitive Drum
Clean with alcohol and water.
This is a consumable part that


may need to be replaced as
required, refer to the Consumable
Parts Section
Refer to the
Remarks
 Inspect
April 2013
Page 45