Table of Contents
Advertisement
The learning path for Systems Engineers (see Figure 3 below) is the
imagePRESS
program. The program is designed for System Engineers who are required to
support the imagePRESS C7000VPe system in a connected environment.
Figure 3 – Learning Path for Systems Engineers
Non-Certified
Systems Engineer
1.
Learning Path for Service Technicians using the "Old" Blended
Training Program
This training program is a comprehensive blended learning program,
which will prepare the service technician to setup and service the
imagePRESS C7000VPe devices.
a)
Table 8 – Online Course Modules
imagePRESS C7000VP/C6000VP/C6000
On-line Training (no Longer Available)
imagePRESS C7010VP/C6010VP/C6010
Hardware Update Training Program
imagePRESS C7000VPe Update Training Program
3
Item Numbers and Part Numbers are subject to change without notice.
imagePRESS C7000VPe Service Guide
C7000VP/C6000VP/C6000
imagePRESS
C7000VP/C6000VP/C6000
Systems Blended Training
Online Course
(09IPCIP7S01E)
and
5-Day Classroom Course
(09IPCIP7S11C)
On-line Course Modules
On-line course modules are available on Canon USA's e-Support
Web site. On-line course modules include a final examination.
The C7000VP/C6000VP/C6000 Hardware training course
provides technicians with the theoretical concepts to install,
configure, and support the imagePRESS C7010VP/C7000VP
Series machines.
The
imagePRESS
Update Training Program focuses on the similarities and
differences
C7010VP/C6010VP/C6010
C7000VP/C6000VP/C6000 devices.
The imagePRESS C7000VPe Update Training Program
focuses on the similarities and differences when comparing
the
imagePRESS
C7010VP/C6010VP/C6010 Series and the imagePRESS
C7000VP/C6000VP/C6000 Series.
Course Name
imagePRESS C7000VPe Service Guide
Systems
C7010VP/C6010VP/C6010
when
comparing
Series
C7000VPe
Blended
Training
Hardware
the
imagePRESS
to
the
imagePRESS
to
the
imagePRESS
3
Course Code
Required
19IPCIP7S01E
Yes
09IPCC7010U00E
Yes
19IPC7VPE00O
Yes
April 2013
Page 14
Hide quick links:
Advertisement
Table of Contents
