Installation Space Requirements - Canon imagepress C7000VPE Service Manual

C.

Installation Space Requirements

The imagePRESS C7000VPe machine approximate installation space
requirements may differ, depending on how the machine is configured and
the optional accessories attached. Always ensure that there is enough space
for service and operation of the device.
IMPORTANT

Keep the back of the machine at least 31.5" (800 mm) away from a wall.

Make sure that approximately 19 3/4" (500 mm) of space is left around
the front, left, and right sides of the machine for the proper servicing of
the equipment.

The floor must be level (with no bows) and flat for the stabilization and
support of the machine.

The weight of the machine is primarily supported by the adjusters and
wheels. A floor plate is recommended to distribute the weight when
installing the machine on all types of flooring including carpet or wood
flooring.

Elevators used to transport the machine must have a minimum depth of
approximately 56". Additional room may be needed to navigate turns.

The machine should not be moved once it is in place.

Do not place anything around the machine. Especially, do not place
anything around the breaker, as doing so may prevent access to the
breaker in an emergency, possibly resulting in personal injury.
imagePRESS C7000VPe Service Guide
imagePRESS C7000VPe Service Guide
April 2013
Page 23