Channel Monitor - Mantracourt T24-ANTA User Manual

Channel Monitor

This page shows a summary of data sent by transmitter modules.
You can see the Data Tag of transmitted messages along with the total number of messages received, the
transmission rate, link quality, data value and any error messages.
Some base stations can also list modules that are sleeping. These will show an ID instead of a Data Tag.
To see any data the base station must be on the same radio channel as the transmitters
and must have a matching Group Key
The radio channel of the base station can be changed by clicking the channel tabs along the top of the page.
If you want to change the Group Key of the attached base station you need to configure its radio settings. See
Configure Base Station
Items you can change or interact with:
Radio Channel Tabs
Clear List
Wake All
Mantracourt Electronics Limited
Click a tab to change the radio channel the base station is operating on
Clear all detected messages from the list
Wake all modules on the current radio channel
26
T24 Telemetry User Manual