Adjusting The Height Of The Accelerator Pedal - Thrustmaster TX racing wheel User Manual

ATTENTION: To avoid any calibration problems, be sure to always disconnect your
wheel's USB cable from the console or PC before making any adjustments to
your pedal set.

Adjusting the HEIGHT of the accelerator pedal

- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head
(8) and its support (7) in place.
- Select your preferred height position, then replace and re-tighten the screws so that the
metal head (8) and its support (7) are held firmly in place.
Low position (default) High position