Fujitsu F-022 User Manual page 18

F-022_E2kou
F-022.book 16 ページ ２０１１年２月２４日 木曜日 午後２時４２分
Clean the jack occasionally with a dry cotton swab etc.
･
- If the jack is soiled, connection gets worse and it may cause
power to be turned off or insufficient battery charge, so clean
the jack with a dry cotton swab etc. Also, be careful never to
damage the jack when cleaning it.
･ Do not place F-022 terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
When using, be careful not to subject excessive force to F-022
･
terminal or the battery.
- If F-022 terminal is crammed into a brimming bag or placed in a
pocket and sat on, display, internal PCBs or battery may be
damaged or malfunction. And, if external devices are plugged
into the external connection jack, the breakage of the connector
or malfunction may result.
Do not rub or scrape the display with a metal piece etc.
･
- It may scratch the display, causing malfunction or damage.
◆ F-022 terminal
Avoid extreme temperature.
･
- Use F-022 terminal where the temperature ranges between 5
and 40°C (limited to the temporary use in a bathroom etc. when
temperature is above 36°C) and humidity ranges between 45
and 85%.
･ F-022 terminal may affect land-line phones, TVs or radios in use
nearby, so use it as far as possible from these appliances.
Maintain a separate record of the data you saved in your F-022
･
terminal.
- If the data is deleted, FUJITSU assumes no responsibility for the
loss of any data.
16
Chapter 1 Introduction
Do not drop F-022 terminal or subject it to shocks.
･
- May cause malfunction or damage.
･ Do not plug external devices into the external connection jack at
a slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
･ Do not close F-022 terminal with the strap etc. held inside.
- May cause malfunction or damage.
It is normal for F-022 terminal to become warm during use or
･
charging. Continue to use it.
･ Do not leave F-022 terminal with the camera in areas under
strong direct sunlight.
- May cause discoloring or burn-in of materials.
･ F-022 terminal should normally be used with the external
connection jack cap closed.
- Dust and/or water brought into F-022 terminal cause troubles.
Do not use F-022 terminal with the rear cover removed.
･
- It may cause the battery to come off, or may cause a
malfunction or damage.
Do not put extremely thick stickers on the display or the key
･
side.
- Doing so may cause malfunction.
While microSD card is being used, do not take the card out and
･
do not turn off F-022 terminal.
- May cause data loss or malfunction.
Do not bring magnetic cards etc. close to F-022 terminal.
･
- Magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
･ Do not bring magnetized objects close to F-022 terminal.
- Bringing strong magnetism close may cause a malfunction.