Use Desktop Holder And Ac Adapter In Combination For Charging; Charge Using Ac Adapter - Fujitsu F-022 User Manual

Table of Contents

Advertisement

F-022_E2kou
02_Get_Started.fm 23 ページ 2011年2月25日 金曜日 午後4時21分
2.5 Use desktop holder and AC adapter in
combination for charging
The battery does not have a full charge at time of purchase. Use AC
adapter for F-022 terminal to charge the battery before using F-022
terminal.
1
Insert the USB cable's connector to the AC adapter, and the
other connector to the desktop holder.
2
Insert the AC adapter's power plug into AC outlet.
3
With F-022 terminal closed, insert it into the desktop holder.
* Check that the light turns on.
4
After charging is completed, remove F-022 terminal from the
desktop holder.
Light
Power plug
AC adapter
Release
button
Connector
Desktop holder
Point
Use desktop holder only in the People's Republic of China.
AC outlet
USB cable
Connector
Insert at the back side

2.6 Charge using AC adapter

1
Insert the USB cable's connector to the AC adapter.
Open jack cap (a) of F-022 terminal, hold the connector
horizontally with the arrow side upward and insert it to the jack
(b).
2
Insert the power plug into AC outlet.
3
When charging is over, pull out the power plug from the outlet,
and pull out the connector from F-022 terminal horizontally
while pressing the release buttons on both sides of the
connector.
Light
Connector
Release button
External
connection
Jack cap
jack
AC outlet
Power
plug
Connector
AC adapter
USB cable
23
Chapter 2 Get started

Advertisement

Table of Contents
loading

Table of Contents