Huawei SUN2000-8KTL User Manual page 74

SUN2000 (8KTL-28KTL)
User Manual
After the initialization parameters are set for multiple SUN2000s in the same network, set the
address and baud rate for each SUN2000 based on the following rules:

Every SUN2000 in the same daisy chain must have a unique address. If communication
with the SmartLogger is required, every SUN2000 in the daisy chain must have a unique
address within the address scope configured for the SmartLogger.

All SUN2000s in the same daisy chain must have the same baud rate. If communication
with the SmartLogger is required, all SUN2000s in the daisy chain must have the same
baud rate configured for the SmartLogger.
----End
Issue 10 (2017-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Operation
67