Huawei SUN2000-8KTL User Manual page 41

SUN2000 (8KTL-28KTL)
User Manual
Procedure
Step 1 Locate the positions for drilling holes using the rear panel provided with the SUN2000 in the
packing case, and mark the positions using a marker, as shown in
Figure 4-16 Locating and marking the hole positions
Step 2 Drill holes using a hammer drill and install expansion bolts, as shown in
An expansion bolt is composed of four parts, as shown in
Figure 4-17 Expansion bolt composition
(1) Expansion sleeve
Issue 10 (2017-07-30)
(2) Flat washer
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
Figure 4-17.
(3) Spring washer
4 Installation
4-16.
4-18.
(4) M10x60 bolt
34