SUN2000 (8KTL-28KTL)
User Manual
When cutting off the cable, take protective measures to prevent personal injury.
Step 3 Insert the core wires (L1, L2, L3, and N) of the AC output cable into the cable gland and the
adapter, as shown in
If the outer diameter of the cable is greater than 16 mm, remove a seal ring from the interior of the cable
gland (as shown in
Figure 5-7 Stripping a seal ring
Figure 5-8 Installing a cable gland and adapter
Step 4 Loosen the screws of the coupler holes using a torque screwdriver. Insert the core wires into
the corresponding holes as shown in
shown in
Issue 10 (2017-07-30)
Figure
5-8.
Figure
5-7) before inserting the power cable into the cable gland and the adapter.
Figure
5-10.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-9. Tighten the screws to a torque of 0.7 N· m, as
5 Electrical Connections
47