Huawei SUN2000-8KTL User Manual page 67

SUN2000 (8KTL-28KTL)
User Manual
Figure 5-27 Waterproof RJ45 connector composition
(1) Shielded plug
(4) Seal ring
When routing communications cables, ensure that they are separated from power cables and
away from interference sources to prevent communication interruptions.
Procedure
Step 1 Remove an appropriate length of the insulation layer from the shielded network cable using a
wire stripper.
Step 2 Insert the shielded network cable through the sealing nut, seal ring, coupling nut, and plastic
housing.
Step 3 Line up the exposed wires of the network cable in sequence and connect them to the
corresponding pins on the plug, as shown in
Issue 10 (2017-07-30)
(2) Plastic housing
(5) Sealing nut
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(3) Coupling nut
Figure 5-29.
5 Electrical Connections
60