Huawei SUN2000-8KTL User Manual page 61

SUN2000 (8KTL-28KTL)
User Manual
Positive and negative metal terminals are packed with positive and negative connectors
respectively. After unpacking, keep the positive and negative ones separate to avoid
confusion.
Procedure
Step 1 Unscrew the locking nuts from the positive and negative connectors.
Step 2 Remove an appropriate length of the insulation layer from the positive and negative power
cables using a wire stripper, as shown in
Figure 5-19 Stripped length
(1) Positive power cable
Step 3 Insert the exposed area of the positive and negative power cables into the metal terminals of
the positive and negative connectors respectively and crimp them using a crimping tool, as
shown in
pulled out by a force less than 400 N.
Issue 10 (2017-07-30)
Figure 5-20. Ensure that the cables are crimped tightly such that they cannot be
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-19.
(2) Negative power cable
5 Electrical Connections
54