Table 1: User Settings Menu Fields - Arris DCX3510-M User Manual

Configuring the User Settings
Setting Description
Audio Coding Selects the audio coding format on the digital output (HDMI and SPDIF) when tuned to a
channel carrying compressed audio. The following formats are supported:
Format
•
•
•
• Dolby Digital Plus – send Dolby Digital Plus over HDMI and Dolby Digital over SPDIF.
Audio Output Range Sets the preferred audio dynamic range when the input audio is decoded by the STB.
Three options are allowed
•
•
• Wide – Enables the complete dynamic range to be reproduced on all outputs, which is
Audio Output Sets the audio output to a fixed or variable setting. The fixed setting produces a constant
output level from the set-top (recommended when connected to an external receiver).
This setting does not apply to the Audio Out (Fixed) connector.
3D Mode Selections are Enabled or Disabled.
Enabled – The "D" key on the remote toggles 3D graphics display modes through the
settings, 2D, 3DTB, and 3DSS.
Disabled – The "D" key on the remote is disabled. The 3D graphics display mode is set by
the signal of the selected program.
Video Sharpness Adjusts the picture sharpness when viewing a standard-definition (SD) program. The
Video Sharpness setting affects all of the video outputs. By default, the sharpness level of
3 is selected. The DCX3510-M supports five distinct levels of video picture sharpness. A
value of 1 corresponds to a "softer" picture while a value of 5 corresponds to a "sharper"
picture. The best sharpness setting depends upon the video connection being used, the
display quality of the TV, and personal preference.
RF Output Channel The default selection is channel 3.
Power ON Timer The designated time for the set-top to power on.
Status This selection disables or enables the Power ON Timer.
Day Option
When enabled, this selection indicates when the Power ON Timer is active. Choices are
Weekends, Weekdays, Every Sunday, Every Monday, Every Tuesday, Every Wednesday,
Every Thursday, Every Friday, or Every Saturday
with OCAP Software DCX3510-M • User Guide
365-095-25385-x.1

Table 1: User Settings Menu Fields

PCM/Stereo – Send decoded audio in PCM format over the digital outputs.
Dolby Digital – Send Dolby Digital audio over the digital outputs.
HDMI – Send appropriate audio format, as per auto negotiation between STB and TV,
when connected over HDMI. If the negotiation indicates:
PCM – send decoded audio in PCM format over the digital outputs
o
Dolby Digital – send Dolby Digital audio over the digital outputs
o
Narrow (default) – Enables minimum dynamic range and is most appropriate when the
TV is connected to the STB over the RF output.
Normal – Enables moderate dynamic range which is most appropriate when a receiver
is connected to the STB over baseband or digital outputs.
most suitable for advanced users who have high quality speakers and audio
equipment.
27