Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Arris DCX3510-M User Manual

Operation

2

Turning Power on and Off

Press POWER on the front panel or remote control to turn the DCX set-top on or off (standby).
When using the remote control, be sure it is in cable mode by pressing CABLE before pressing
POWER.

Changing Channels

You can change channels in three ways:
•
Press CHANNEL + or – on the remote control to step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the remote
control.
•
Select the channel in the Interactive Program Guide.

Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume. When you adjust the volume,
the volume scale is displayed on the screen. Press MUTE on the remote control to toggle the
sound on and off.
For best audio quality when using the analog L/R (variable) volume controlled audio outputs,
use the remote control to set the DCX set-top to approximately three quarters of the maximum
volume level and then adjust the audio levels on external devices such as your TV or A/V
receiver.
When using the analog L/R (fixed) audio outputs or any of the digital audio outputs (HDMI,
IEEE-1394, or optical digital audio) adjust the audio levels on your external device such as your
TV or A/V receiver. You may also be able to program your remote to control the volume of your
TV or A/V receiver directly (refer to the remote control instruction manual).

Interactive Program Guide

The Interactive Program Guide (IPG) displays information about TV programs and enables you
to access features such as Parental Control or Pay-Per-View. Interactive program guides can
vary with each cable service provider. Refer to the Interactive Program Guide's instruction
manual for detailed instructions.
with OCAP Software DCX3510-M • User Guide
365-095-25385-x.1
Operation
4