Table of Contents
Advertisement
Connecting Your DCX Set-top
Connecting an HDTV — Separate Video/Audio Connections
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the DCX
set-top.
DVI
If your TV has a DVI input, use the DVI connection for your video, connect a HDMI-to-DVI
adapter or cable to the HDMI out connector on the DCX set-top and the DVI-HDTV connector
on your TV.
Note: A DVI connection supports only the video connection between the DCX set-top and the HDTV.
To connect your audio connections with your TV speakers, go to the
To connect your audio connections for an A/V receiver, go to
Component Video (YPbPr)
Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and DCX
set-top.
Note: This connection supports only the high definition video connection between the DCX set-top
and the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the colors will
not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to the
To connect your audio connections for an A/V receiver, go to
Audio.
Audio
If your TV does not have digital audio inputs, connect the stereo audio cable to the audio L/R
connectors on the DCX3510-M set-top and the Audio L/R connectors on the HDTV.
If your TV supports a digital audio inputs, use the digital audio optical S/PDIF outputs instead of
the audio L/R outputs. S/PDIF offers better audio quality, including support for Dolby
audio.
For information on configuring your DCX set-top settings, go to
with OCAP Software DCX3510-M • User Guide
365-095-25385-x.1
Audio
section.
Connecting an A/V Receiver —
Audio
section below.
Connecting to an A/V Receiver —
Configuring the User
Settings.
Audio.
®
Digital
12
Hide quick links:
Advertisement
Table of Contents
