Using The External Dvr Expansion Feature - Arris DCX3510-M User Manual

Digital Video Recorder (DVR)

Using the External DVR Expansion Feature

To use the external DVR expansion feature of the DCX3510-M, first ensure that your service
provider has authorized your DCX3510-M for external DVR functionality. If authorized, follow
these steps to begin using the external DVR feature:
1. Power on your DCX3510-M and your television and ensure that you have a picture.
2. Connect a compatible eSATA hard disk drive to the DCX3510-M using the eSATA cable
supplied with your external drive enclosure. The DCX3510-M will automatically detect that
a hard disk drive has been connected to the eSATA interface.
3. The DCX3510-M displays an alert that an external hard disk drive has been connected and
that it must be formatted. Use the remote control to confirm the format (formatting a drive
erases any and all content that on the drive).
4. The DCX3510-M displays a message when formatting is complete and if the operation
succeeded or failed.
During formatting of the external hard disk drive, the DCX3510-M performs several tests to
determine if the hard drive's performance is acceptable for DVR functionality. If the hard drive is
unable to pass these performance tests, the DCX3510-M alerts you that the external drive is not
compatible for DVR use.
5. The DCX3510-M confirms that an external drive is connected and available for use.
While using the external DVR expansion feature of your DCX3510-M:
•
Recordings made on the external hard disk drive can only be played back on the same
DCX3510-M used to record the programs. You cannot connect your external hard disk
drive to another DCX3510-M (or another cable box with an eSATA interface) and watch
programs that have been recorded on the hard drive.
•
You can use multiple external hard disk drives with the same DCX3510-M, however; you
can only watch the recordings that are available on the drive connected to the DCX3510-M
at that time. To watch recordings that you made on another external drive, simply
disconnect the external drive, follow the on-screen prompts, reconnect the other external
drive, and again follow the on-screen prompts.
•
Whenever the DCX3510-M reboots, a temporary loss of the program listings in the
interactive program guide (IPG) is possible.
with OCAP Software DCX3510-M • User Guide
365-095-25385-x.1
7