Vega VEGAMET 391 Operating Instructions Manual page 21

Device settings - Device-
TAG
Device settings - Host
Name/IP addr.
VEGAMET 391 • 4 ... 20 mA/HART
6 Setup with the integrated display and adjustment unit
•
Further settings: Includes simulation, reset, PIN, sensor address,
...
•
Info: Shows serial number, software version, last change, instru-
ment features, MAC addr., ...
→
Select the requested menu item via the respective keys and
confirm with [OK].
You can assign an unambiguous name to VEGAMET 391 via the
Device-TAG. This function is recommended when several instruments
are implemented and a good documentation of larger systems is
required.
→
Carry out your settings via the appropriate keys and save with
[OK].
For instruments with integrated Ethernet interface, the automatic
addressing via DHCP is preset, i.e. the IP address must be assigned
by a DHCP server. Generally the instrument is contacted via the Host
name. By default, the host name consists of the serial number plus
"VEGA-" in front. As an alternative, it is also possible to enter a static
IP addr. with Subnet mask and optional Gateway addr.
Note:
Keep in mind that your modification will be only effective after a restart
of VEGAMET 391. You can find further information of these network
parameters in the supplementary instructions "RS232/Ethernet con-
nection" and in the Online help of the respective DTM.
. Carry out your settings via the appropriate keys and save with
[OK].
. Carry out your settings via the appropriate keys and save with
[OK]. Disconnect briefly the operating voltage so that the modi-
fied settings become effective.
21