Cabling The Device; Grounding And Surge Protection - AudioCodes Mediant 800 MSBR Hardware Installation Manual

Hardware Installation Manual
6

Cabling the Device

This section describes the cabling of the device, which includes the following:

Grounding (earthing) the device – see Section

Connecting to the WAN – see Section

Connecting to the LAN – see Section

Connecting PoE-enabled equipment – see Section

Connecting the FXS interfaces – see Section

Connecting to Analog Devices – see Section

Connecting the Analog Lifeline – see Section

Connecting to BRI lines – see Section

Connecting the PSTN Fallback for BRI Lines – see Section

Connecting E1/T1 trunks – see Section

Connecting to a computer for serial communication – see Section

Connecting a USB storage device – see Section

Connecting the OSN server – see Section

Connecting to the power supply – see Section
6.1

Grounding and Surge Protection

The device must be connected to earth (grounded) using an equipment-earthing conductor.
The equipment is classified as Class I EN60950 and UL60950 and must be
earthed at all times.
For Finland: "Laite on liltettava suojamaadoituskoskettimilla varustettuun
pistorasiaan."
For Norway: "Apparatet rna tilkoples jordet stikkontakt."
For Sweden: "Apparaten skall anslutas till jordat uttag."
MSBR Series
6.1
6.2 on page
6.3 on page
6.5.1
6.5.2
6.5.3
6.6.1 on page
6.7 on page
6.9
6.10 on page
6.11
Protective Earthing
33
6. Cabling the Device
on page 33
33
43
6.4 on page 44
on page 45
on page 46
on page 47
48
6.6.2 on page
50
6.8 on page
on page 48
55
on page 57
Mediant 800 MSBR
49
51