Configuring Device's Dhcp Server - AudioCodes Media 800 MSBR User Manual

User's Manual
5. Click OK to save your settings.
3.2

Configuring Device's DHCP Server

The device is supplied with an enabled embedded DHCP server for the LAN, and with
default IP pool addresses relating to the default subnet LAN. You can either disable the
DHCP server or modify the IP address pool accordingly. The device's DHCP server uses
this setting to allocate IP addresses to the computers connected to its LAN interface.

To configure DHCP on the device:
1. Open the DHCP Server page (Configuration tab > Data menu > Data Services >
DHCP Server).
2. Click the Edit
3. From the 'IP Address Distribution' drop-down list, select DHCP Server.
4. Define the IP address pool.
5. Click OK.
Version 6.6
Figure 3-2: Defining LAN Data Routing IP Address
button corresponding to the "LAN switch VLAN 1" connection.
Figure 3-3: Configuring the DHCP Server
3. Assigning Data-Router LAN and WAN IP Addresses
31 Mediant 800 MSBR