Wavelength Store L Control; Wavelength Recall L Control - ILX Lightwave OMM-6810B User Manual

Wavelength Store
• Program the desired wavelength into the OMM-6810B using the procedure described in
• Press the WAVELENGTH BLUE SHIFT button. The LED above the SHIFT button will be
• Press the WAVELENGTH STORE button. The indicator above the WAVELENGTH AUTO
• Press one of the four channel buttons ( 1, 2, 3, 4). The WAVELENGTH SHIFT and
• Repeat this procedure to store additional wavelength channels.
Wavelength Recall
• Press the WAVELENGTH BLUE SHIFT button. The LED above the SHIFT button will be
• Press one of the four channel buttons (
• Press the WAVELENGTH BLUE SHIFT button to exit the SHIFT mode.
01_10

Control
Four unique wavelengths can be stored in the 6810B for
recall later. This feature is useful to switch quickly between
commonly used wavelengths instead of programming the
wavelength into the 6810B every time it is used. Use the
procedure below to save up to four wavelengths.
section 2.4.5.8.
illuminated. The alternate functions for the WAVELENGTH AUTO, LEFT, RIGHT, UP and
DOWN buttons are now utilized.
button will begin to flash.
STORE indicators extinguish and the wavelength is stored.

One of the four saved wavelength channels can be recalled
to the front panel wavelength display using the following
instructions. This feature is useful to switch quickly between
commonly used wavelengths.
illuminated. The alternate functions for the WAVELENGTH AUTO, LEFT, RIGHT, UP and
DOWN buttons are now utilized.
the front panel. The unit remains in the SHIFT mode (the WAVELENGTH SHIFT indicator
remains on) to allow rapid switching between wavelengths by simply pressing one of the
 
channel buttons ( 1, 2,
I N S T A L L A T I O N A N D O P E R A T I O N
Control
  
1, 2, 3,
 
3, 4).
Front Panel Controls

4) to recall the desired wavelength to
2
C H A P T E R
13
OMM-6810B
