Configuration Mode; Operating The Master In Configuration Mode - Mitsubishi Electric FX2N-32ASI-M User Manual

FX2N-32ASI-M AS-interface Block
6.2

Configuration Mode

This mode is for setting the slave address number.
6.2.1

Operating the Master in Configuration Mode

In the configuration mode, the green "PRJ MODE LED" lights up and the following is done.
1) For active slave - all recognized slave are activated with the exception of slave 0 when
desired and actual configurations do not match.
2) Displayed message
32ASI-M displays all slaves entered in the list of detected slave (LDS) at a speed of two per
second. If the display is empty, the list is empty, i.e. no slaves were recognized.
Configuration Mode and Protected Operating Mode 6.
6-3