Table of Contents
Advertisement
FX2N-32ASI-M AS-interface Master Block
5.6
List of Activated Slaves (LAS) <BFM #12, #13> (Read only)
In this list one bit is set for each activated slave (1 to 31).
When the bit is ON, the slave corresponding to the bit is active in the system. If the bit is OFF,
the slave corresponding to the bit is not active in the system.
List of active slaves are detected as follows:
1) Activation phase
2) In the configuration mode
LAS (List of Active Slaves) is same as LDS (List of Detected Slaves), i.e. a detected slave
always becomes an active slave.
3) In the protected operating mode
LAS consists of the slave that are ON in both the LDS and PLS (List of Projected Slaves),
i.e. an active slave is both a detected slave and a projected slave.
Table 5.6: List of Activated Slaves (LAS)
BFM No.
Bit No.
BFM #12
Slave No.
Bit 0
0
Bit 1
1
Bit 2
2
Bit 3
3
:
:
:
:
Bit 15
15
Allocation of Buffer Memories (BFMs) 5.
BFM No.
Bit No.
Slave No.
Bit 0
Bit 1
Bit 2
BFM #13
Bit 3
:
:
Bit 15
16
17
18
19
:
:
31
5-11
Advertisement
Table of Contents
