Display Explanation; General Screen - Siemens RWD32 Installation And Commissioning Manual

Display explanation

Name Description
Adjustable setpoint page
> > > >
I I I I
K K K K
10 Application No
#
! Day time operation
Night time operation
X1 Universal (Main) Input X1
X2 Universal (Auxiliary) Input X2
K Kelvin
% Percentage scale (e.g. RH)
---- No unit (e.g. pressure, air
quality and air volume flow)
Sec Second
Q1 Digital output 1
Q2 Digital output 2
On On status
Off Off status
°C Celsius scale
°F Fahrenheit scale
Siemens Building Technologies
Display, Setting Range

General Screen

10...79 (Not consecutive
numbers)
• Ni 1000Ω: -50...150°C
(unchangeable)
• Pt 1000Ω: -20...180°C
(unchangeable)
• 0-10 Vdc: -100...8000
• Ni 1000Ω: -50...150°C
(unchangeable)
• Pt 1000Ω: -20...180°C
(unchangeable)
• 0-10 Vdc: -100...8000
• Variable resistor: the
resistance range should
within 0...1000 Ω
■ is on; is off
■ is on; is off
O3341(RWD32) V14.doc
Name Description
TOOL PC communication port being used
OUT The setting is out of range
RANGE
Err Sensors error
#10 = Using not the defaulted sensor
Winter/Summer mode being chosen
WIN/SUM
or activated
Limiter mode being chosen or
LIM
activated
Remote setpoint mode being chosen
REM
or activated
Setpoint compensation mode being
COMP
chosen or activated
Cascade mode being chosen or
CAS
activated
MaxPrior Maximum priority mode being
chosen or activated
SP-h Setpoint on the heating side for
temperature control
SP-c Setpoint on the cooling side for
temperature control
SP-r Setpoint on the reverse acting side
for active input (0...10 Vdc)
SP-d Setpoint on the direct acting side for
active input (0...10 Vdc)
XDZ • For R or D independent loops.
Day setpoint offset from the first
output to the second output when
in REM mode.
• For R+D application. Dead zone
between R and D day setpoints
when in REM mode.
O3341A031En2
Display, Setting Range
• Ni: 0.5...180 K
• Pt: 0.5...180 K
• Active input:
0.05...7300
8-Jun-01 Page 3