Furuno Felcom15 Operator's Manual page 24

9. To escape from the test, press the [Esc] key twice on the terminal unit. The test mode is
stopped and the message shown below appears to notify you that normal operation has
been restored.
INF: Distress/SSAS Buttons returned to NORMAL OPERATION.
Further, because the button remains pushed in ( ), the message "Please return the
SSAS button into OFF-STATE." appears.
10. Push the button again to pop it out ( ).
11. Close the button cover.
12. Press the [Esc] key three times to return to the standby display.
Note: If the button is left pushed in ( ) when the terminal unit is turned on, the equipment
displays "Please return the SSAS button into OFF-STATE." Push the button again to
turn off ( ) the button.
CAUTION
<Press ESC key to continue>
22