Furuno Felcom15 Operator's Manual page 11

5. Attach the switch cover as shown below. Note that the cover may be turned 180° to
change cover opening direction.
Flush mounting
The optional flush mount kit OP16-28 (Code No. 004-448-010) is required.
Name
Fixture
Pan head screw
Self-tapping screw 4x16
1. Cut out the mounting position referring to the outline drawings at the back of this
manual.
2. Fix the unit to the fixture with four pan head screws (supplied).
3. Fasten the fixture with the unit to the mounting location with four self-tapping screws
(supplied).
4. Attach switch cover as shown above.
Press here and hold down for five seconds.
Switch cover
Type
16-018-7201-1 100-317-931
M3x6
9
Code No. Qty
1
000-800-362 4
000-802-080 4
Remarks