Audio Output Settings - Neets SB1 Installation Manual

Audio input settings
Audio input settings are used to adjust settings for Wake-on-signal settings.
All commands start with: NEUNIT=1,SETTINGS=INPUT, followed by the command in <A>,
the value after the equal sign must be replaced with the value in <X> or a question mark,
all commands must end with a \CR.
Description
Set wake-on-signal function
on or off. This applies for all
inputs
Example of use:
NEUNIT=1,SETTINGS=INPUT,WOS=ON\CR
NEUNIT=1,SETTINGS=INPUT,WOS=OFF\CR
NEUNIT=1,SETTINGS=INPUT,WOS=?\CR

Audio output settings

Audio output settings adjust Sound Bar equalizer output parameters.
All commands start with: NEUNIT=1,SETTINGS=OUTPUT, followed by the command in <A>,
the value after the equal sign must be replaced with the value in <X> or a question mark,
all commands must end with a \CR
Description
Select equalizer preset
Example of use:
NEUNIT=1,SETTINGS=OUTPUT,EQ=1\CR
NEUNIT=1,SETTINGS=OUTPUT,EQ=2\CR
NEUNIT=1,SETTINGS=OUTPUT,EQ=3\CR
NEUNIT=1,SETTINGS=OUTPUT,EQ=?\CR
Page 16 of 16
<A> <X>
WOS=<X> ON or OFF
<- Set wake-on-signal function on.
<- Set wake-on-signal function off.
<- Query the wake-on-signal setting.
<A> <X>
EQ=<X> 1 – 3
<- Select equalizer preset 1.
<- Select equalizer preset 2.
<- Select equalizer preset 3.
<- Query the equalizer preset.
Default <X> R/W
OFF R/W
Default <X> R/W
1 R/W