Foreword
This document describes how to install and operate the Neets Sound Bar - SB1.
COPYRIGHT - All information contained in this manual is the intellectual property and copyrighted
material of Neets. All rights are reserved. No third party is allowed access to content,
information or data in this manual without Neets' express written consent.
CHANGES - Neets reserve the right to change the specification and functions of this product
without prior notice.
Questions, AFTER reading this manual, can be addressed to the local distributor or:
Neets A/S
Langballe 4
8700 Horsens
Denmark
by E-Mail: Support@Neets.dk
or you may use our contact form at www.neets.dk
Revision list
This document has the following revision changes:
Author: Date
Description
DB: 01-11-2017
First release
DB: 13-11-2017
Edits in chart
DB: 22-11-2017
Edits to note
Paragraph removed
Edits to graphics
Section about Audio input settings removed
What is in the box?
The box contain the following items:
• 1 x Neets – Sound Bar SB1
• 1 x Neets 24V/2.5A external power supply
• 1 x Power cable for power supply
• 2 x Terminal connectors
• 2 x Wall brackets
• 4 x M5 screws for wall brackets
• 4 x Rawlplugs
• 4 x Rubber feets
• 1 x Velcro set
Page 2 of 16
Pages
Rev
All
1.00
12
2.00
7
3.00
11
12
16