Global Functions; Audio Input Settings - Neets SB1 Installation Manual

Global functions

In the global functions, all the functions allowed to adjust the basic functions of the Sound Bar is
showen.
All commands start with "NEUNIT=1," followed by the command in <A>, the value after the equal
sign must be replaced with the value in <X> or a question mark, all commands must end with a \
CR
Description
Power amplifier on and off
Select audio input
Increment or decrement
output volume
Set output volume to
specific value
Mute audio output on or off
Request software version
Example of use:
NEUNIT=1,POWER=ON\CR
NEUNIT=1,POWER=OFF\CR
NEUNIT=1,POWER=?\CR
NEUNIT=1,INPUT=1\CR
NEUNIT=1,INPUT=2\CR
NEUNIT=1,INPUT=3\CR
NEUNIT=1,INPUT=?\CR
NEUNIT=1,VOL=INC\CR
NEUNIT=1,VOL=DEC\CR
NEUNIT=1,VOL=DEC\CR
NEUNIT=1,VOL=+10\CR
NEUNIT=1,VOL=?\CR
NEUNIT=1,MUTE=ON\CR
NEUNIT=1,MUTE=OFF\CR
NEUNIT=1,MUTE=?\CR
<A> <X>
POWER=<X> ON or OFF
INPUT=<X> 1 to 3
VOL=<X> INC or DEC
-70 to +12
VOL=<X>
MUTE=<X> ON or OFF
SWVERSION=?
<- Turn on the Sound Bar.
<- Turn off the Sound Bar.
<- Query the power status.
<- Sets the audio input to input 1 (UNBALANCED).
<- Sets the audio input to input 2 (OPTICAL).
<- Sets the audio input to input 3 (BALANCED).
<- Query the selected audio input.
<- Increments the master volume one step.
<- Decrements the master volume one step.
<- Decrements the master volume one step.
<- Sets the master volume to 10.
<- Query the master volume level.
<- Mute audio output.
<- Unmute audio output.
<- Query the audio output mute state.
Default <X> R/W
OFF R/W
1 R/W
R/W
0
R/W
OFF R/W
x.y.z R
Page 15 of 16