Replacement Parts - TA Instruments AR 2000 Operator's Manual

Replacement Parts

Replacement parts for the AR Pressure Cell are available from TA Instruments. See the table below when
ordering parts.
Part Number
200352.002
200353.001
200380.001
200380.002
200380.003
400.09199
403001.901
403008.901
403029.901
403032.901
403040.001
403067.901
603.03519
603.03557
613.03378
613.04701
110
Description
Pressure snubber used in manifold kit
Three-way ball valve used in manifold kit
Wrench Open-End 7/16 & 1/2
Wrench Open-End 7/16 & 9/16
Wrench Open-End 9/16 & 11/16
Wrench (Tommy Bar) used to torque the Rotor Cap into the Pressure Cell
Cup
Pressure Cell Assembly
Upper Pressure Cell Assembly (with bob and magnet)
Manifold Assembly
Alignment Magnet used to hold the Rotor Assembly Magnet in place
Sorbothane Pad used to mount the Tubing Manifold
Safety Pressure Relief Port (with 2500 PSI Rupture Disc)
Large Kalrez O-Ring 1.296 I.D. used between Rotor Cap and the Pressure
Cell Cup
Kalrez O-Ring 0.208 I.D. used with Thumbscrew on top of Rotor Assembly
Cap
Metric Hex Wrench Set (5, 4, 3, 2.5, 2, 1.5 mm sizes)
90-degree Angle Pliers used on the Rotor Assembly Locking Nut
AR 2000 Operator's Manual