Configuring Snmpv3: Examples - Cisco NCS 5000 Series Manual

Implementing SNMP
Command or Action
Example:
RP/0/RP0/CPU0:router# snmp-server user
noauthuser group_name v3
Step 6 commit
Step 7
show snmp
Example:
RP/0/RP0/CPU0:router# show snmp
Step 8 show snmp engineid
Example:
RP/0/RP0/CPU0:router# show snmp engineid
Step 9
show snmp group
Example:
RP/0/RP0/CPU0:router# show snmp group
Step 10
show snmp users
Example:
RP/0/RP0/CPU0:router# show snmp users
Step 11 show snmp view
Example:
RP/0/RP0/CPU0:router# show snmp view

Configuring SNMPv3: Examples

Setting an Engine ID
This example shows how to set the identification of the local SNMP engine:
snmp-server engineID local 00:00:00:09:00:00:00:a1:61:6c:20:61
Note After the engine ID has been configured, the SNMP agent restarts.
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
Configuring SNMPv3: Examples
Purpose
(Optional)
Displays information about the status of SNMP.
(Optional)
Displays information about the local SNMP engine.
(Optional)
Displays information about each SNMP group on
the network.
(Optional)
Displays information about each SNMP username
in the SNMP users table.
(Optional)
Displays information about the configured views,
including the associated MIB view family name,
storage type, and status.
29