Cisco NCS 5000 Series Manual page 38

Configuring SNMPv3
SUMMARY STEPS
1. configure
2. (Optional)
3. snmp-server view view-name oid-tree {included | excluded}
4. snmp-server group name {v1 | v2c | v3 {auth | noauth | priv}} [read view] [write view] [notify view]
[access-list-name]
5. snmp-server user username groupname {v1 | v2c | v3 [auth {md5 | sha} {clear | encrypted}
auth-password [priv des56 {clear | encrypted} priv-password]]} [access-list-name]
6. commit
7. (Optional)
8. (Optional)
9. (Optional)
10. (Optional)
11. (Optional)
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 snmp-server engineid local engine-id
Example:
RP/0/RP0/CPU0:router# snmp-server engineID
local 00:00:00:09:00:00:00:a1:61:6c:20:61
Step 3 snmp-server view view-name oid-tree {included | excluded}
Example:
RP/0/RP0/CPU0:router# snmp-server view
view_name 1.3.6.1.2.1.1.5 included
Step 4
snmp-server group name {v1 | v2c | v3 {auth | noauth | priv}}
[read view] [write view] [notify view] [access-list-name]
Example:
RP/0/RP0/CPU0:router# snmp-server group
group_name v3 noauth read view_name1 write view_name2
Step 5 snmp-server user username groupname
{v1 | v2c | v3 [auth {md5 | sha} {clear | encrypted}
auth-password [priv des56 {clear | encrypted}
priv-password]]} [access-list-name]
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
28
snmp-server engineid local engine-id
show snmp
show snmp engineid
show snmp group
show snmp users
show snmp view
Purpose
(Optional)
Specifies the identification number of the local
SNMP engine.
Creates or modifies a view record.
Configures a new SNMP group or a table that maps
SNMP users to SNMP views.
Configures a new user to an SNMP group.
Implementing SNMP