Specifications; Safety Precautions - u-blox EVK-M8BZOE User Manual

2 Specifications

Parameter
Serial Interfaces
Dimensions
Power Supply
Normal Operating temperature
Table 2: EVK-M8BZOE specification

2.1 Safety precautions

EVK-M8BZOE must be supplied by an external limited power source in compliance with the clause 2.5 of the
standard IEC 60950-1. This power source must be a Safety Extra-Low Voltage (SELV) circuit, and only SELV circuits
are to be connected to the evaluation kit interfaces and antennas.
For more information about SELV circuits see section 2.2 in Safety standard IEC 60950-1 [6]
UBX-17053592 - R03
Specification
1 USB V2.0
1 RS232, max. baud rate 460.8 kBd
- DB9: PC compatible
2
1 DDC (I C compatible) max. 400 kHz
1 SPI , max. clock 1 MHz, max. data 125 kbytes/second
1 UART , max. baud rate 460.8 kBd
83 x 67 x 20 mm
5 V via micro USB connector or external powered via extra power supply pin 2 (V5_IN)
and pin 18 (GND) on digital connector
-20°C to +70°C
Early Production Information
EVK-M8BZOE User Guide
Specifications
Page 8 of 33