Software And Documentation; U-Center Gnss Evaluation Software; System Requirements - u-blox EVK-M8BZOE User Manual

1.3 Software and documentation

The EVK-M8BZOE installation software and documentation is available at https://www.u-blox.com/en/evaluation-
kits.
EVK-M8xZOE Quick Start Guide [5] is available at https://start.u-blox.com
u-center GNSS evaluation software and Windows driver for the evaluation board are available from web. See
Section 3.1 for details.
For more ZOE-M8B related documentation, see the ZOE-M8B Data Sheet [1], the ZOE-M8B System Integration
Manual [2] and the u-blox 8 / u-blox M8 Receiver Description including Protocol Specification [3].

1.4 u-center GNSS evaluation software

The installation software includes u-center, which is an interactive tool for configuration, testing, visualization and
data analysis of GNSS receivers. It provides useful assistance during all phases of a system integration project.

1.5 System requirements

•
PC with USB or RS-232 interface
•
Operating system: Windows 7 onwards (x86 and x64 versions)
•
The EVK board includes Silicon Labs CP2102 USB to UART Bridge. Windows drivers for this interface are
available from Microsoft Windows Update service. See section 3.1 for details.
UBX-17053592 - R03 Early Production Information
EVK-M8BZOE User Guide
Product description
Page 7 of 33