Flash; Reset_N And Safeboot_N; Extint - u-blox EVK-M8BZOE User Manual

4.5 Flash

EVK-M8BZOE has an SQI flash connected to ZOE-M8B SiP. By default it can be used to:
•
Store the current configuration permanently
•
Save data logging results
•
TM
Hold AssistNow Offline and AssistNow

4.6 RESET_N and SAFEBOOT_N

RESET_N and SAFEBOOT_N are available on jumpers (J5 and J10) as well as on digital connector J1, see section
4.4 for more information.

4.7 EXTINT

On the EVK-M8BZOE the EXTINT signal of ZOE-M8B is available on digital connector J1 (see section 4.4), and on
RS-232 connector (see section 4.2.3).
If EXTINT0 on RS-232 is used, ensure the EXTINT signal available at digital connector J1 is connected to
1.8 V.
UBX-17053592 - R03
TM
Autonomous data
Early Production Information
EVK-M8BZOE User Guide
Device description
Page 15 of 33