Grizzly G0505 Owner's Manual page 14

Using Machine Mounts
Using machine mounts, shown in Figure 7, gives
the advantage of fast leveling and vibration reduc-
tion. The large size of the foot pads distributes
the weight of the machine to reduce strain on the
floor.
The machine mounting holes (see Figure 6 on
the previous page) accept M8-1.25 threads.
Figure 7. Machine mount example.
-12-
Mounting to the Workbench
If you choose to permanently mount your planer
to the workbench, use the four bolts holes in the
base (see Figure 6 on the previous page) to
mount it to the workbench.
The strongest mounting option is a "Through
Mount" where holes are drilled all the way through
the workbench, and hex bolts, washers, and
hex nuts are used to secure the planer to the
workbench, as shown in Figure 8.
Machine Base
Workbench
Figure 8. Example of a through mount setup.
Another option for mounting is a "Direct Mount"
where the machine is simply secured to the work-
bench with a lag screw, as shown in Figure 9.
Machine Base
Workbench
Figure 9. Example of a direct mount setup.
Model G0505 (Mfg. since 4/04)
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Lag Screw
Flat Washer