Instruction Manual VBRO20 20 LITRE WET & DRY COMMERCIAL VACUUM CLEANER Model: BJ134-1400-20 ● Please read this Instruction Manual carefully before operation and follow all guidelines before using this vacuum cleaner. ● Please keep this Manual for future reference.
Page 2
*** SAFETY RULES & CAUTIONS *** Check before operation that the local power supply is the same as the specification on the rating label. The machine is not suitable for picking up dusts, objects or liquids which are explosive, flammable, poisonous, or in any way represent a danger to health.
Page 3
FEATURES & TECHNICAL SPECIFICATIONS Product Features • Wet and Dry vacuum cleaner • Accessory storage on base • Drainage plug on the bottom of the tank TECHNICAL SPECIFICATIONS Model VBRO20 (BJ134-1400-20) Stainless Steel Tank Power 1400W Capacity Accessories 32mm Voltage 220-240V Hose Length 1.8m...
OPERATING INSTRUCTIONS Make sure that the power supply is identical to that shown on the rating label/voltage plate. Insert the hose connector into the air inlet mouth as picture shows, make sure the connector is tightly fastened. Press the connector button as picture shows and pull the connector out when you want to pull hose connector from this machine.
Thank you for purchasing your new Cleanstar product. We are confident this product will give you trouble-free use and excellent service, provided the operator uses and maintains the product in accordance with the Instruction Manual. Please read the Instruction Manual carefully before using the product for correct operation and maintenance procedures, and store it in a safe place for future reference.
Page 7
If the product was serviced or repaired by anyone other than Cleanstar, or one of Cleanstar’s Authorised Service Agents (ASA). Cleanstar is unable to accept any responsibility under this warranty for any repair work not carried out by an ASA or from the use of non-genuine parts.
Need help?
Do you have a question about the VBRO20 and is the answer not in the manual?
Questions and answers