Related Manuals for CleanStar Butler Pro
Summary of Contents for CleanStar Butler Pro
- Page 1 BUTLER PRO 10L DRY COMMERCIAL VACUUM CLEANER INSTRUCTION MANUAL Cleanstar Pty Ltd 59 Radford Road, Reservoir VIC 3073 Australia Ph: (03) 9460 5655 Fax: (03) 9460 5666 Email: sales@cleanstar.com.au www.cleanstar.com.au...
-
Page 2: Tips And Warnings
TIPS AND WARNINGS Your Cleanstar BUTLER PRO is ready to be used immediately after removing it from the box. When using the BUTLER PRO, please adhere to any rules and precautions applicable to operating an electric device. After vacuuming and before cleaning or maintenance of the machine, the plug has to be disconnected from the electric socket. - Page 3 COMPONENTS OF BUTLER PRO...
- Page 4 HOW TO USE THE BUTLER PRO In order to pull the cable out of the lid, simply pull on the plug. In order to rewind the cable, switch the small handle upright and turn the winder around clockwise. Do not wind the cable in the opposite...
- Page 5 NOZZLES Suction hose is a basic piece of equipment of a Crevice nozzle due to its slim shape, the vacuum cleaner. It is flexible, does not get tangled nozzle enables cleaning areas which are and makes maneuvering difficult to access such as gaps, corners, the machine easy.
-
Page 6: Maintenance
MAINTENANCE To attach or detach the suction hose, follow the To change the suction unit inlet air filter, follow the drawing below. Using faulty or clogged filters drawing below. can damage the motor! When the suction power noticeably decreases and cleaning the filter does not help, the filter has to be replaced with a new one. - Page 7 MAINTENANCE To change the dust bag, follow the three easy steps below. Remove the full dust bag, slide in a new one Remove the hose Attach the hose again...
- Page 8 Caring for your vacuum cleaner Never use your vacuum cleaner for How to take care of your vacuum cleaner vacuuming - Replace a full dust bag with a new one. - Ash, cigarettes, matches or any hot items - Do not overfill the dust bag. whatsoever.
-
Page 9: Exploded Drawing
EXPLODED DRAWING... -
Page 10: Conditions Of Warranty
If the product was serviced or repaired by anyone other than Cleanstar, or one of Cleanstar’s Authorised Service Agents (ASA). Cleanstar is unable to accept any responsibility under this warranty for any repair work not carried out by an ASA or from the use of non-genuine parts.
Need help?
Do you have a question about the Butler Pro and is the answer not in the manual?
Questions and answers