Download
Share
Print this page
CleanStar GRAVITY V2200 Instruction Manual
  1. Manuals
  2. Brands
  3. CleanStar Manuals
  4. Vacuum Cleaner
  5. GRAVITY V2200
  6. Instruction manual

CleanStar GRAVITY V2200 Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the GRAVITY V2200 and is the answer not in the manual?

Questions and answers

Related Manuals for CleanStar GRAVITY V2200

Summary of Contents for CleanStar GRAVITY V2200

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING-To reduce the risk of fire, electric shock, or injury: 1. Do not leave the vacuum cleaner unattended when plugged in. Unplug from outlet when not in use.

  • Page 4: Components And Equipment

    COMPONENTS AND EQUIPMENT 1. Floor nozzle 2. Telescopic tube 3. Storage clip 4. Air slide 5. Suction hose 6. Motor speed regulator knob 7. Automatic cord rewind 8. On/off switch 9. Suction hose connection - 3 -...
  • Page 5 PREVENTION Switch off the vacuum cleaner immediately if the air intakes, hose, floor brush or the telescopic tube becomes blocked. Before starting the vacuum cleaner up again remove the object causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes.

  • Page 6: Assembling The Vacuum Cleaner

    ASSEMBLING THE VACUUM CLEANER 1. Assembly and disassembly of the tube  Assembly: Insert the hose end in the air intake opening. Push the hose end in until it locks in place  Disassembly: Take the hose end out from the air intake after disconnecting from the mains socket.

  • Page 7: Operation

    Furniture brush Upholstery nozzle Floor nozzle: Settings for carpets and tiled, wood-block or similar floors: A: Hard floors = brush bar extended B: Carpets = brush bar retracted OPERATION Vacuum cleaning 1: Before using the device first roll out a sufficient length of electric flex cable and plug into the mains socket. The yellow mark on the electric flex cable is the maximum length that must not be exceeded.
  • Page 8 2: To rewind the power cable, press the button with one hand and guide the cable with the other hand to ensure that it does not whip causing damage. Regulating the suction power You can set the suction power on the device individually as you require it using the suction regulator. We recommend using minimum suction power for delicate materials.
  • Page 9 CYCLONE CLEANING SYSTEM The unit has a cyclone vacuum cleaner function without needing a dust bag. The sucked up dirt is forced into the dust container. The air is cleaned by a washable permanent filter in the dust container, motor protection filter and an exhaust air filter (HEPA filter).
  • Page 10 Cleaning the sponge filter The sponge filter and the sponge cover should be cleaned regularly. Cleaning is best done when emptying the dust container. To do this follow the instructions in the Emptying dust container section. 1. Switch off the vacuum cleaner and disconnect the plug from the mains. To do this always pull on the plug and not on the cable.