Static Data Download; Nfc Function - SatLab SL800 User Manual

`
When the receiver storage space is less than 10MB, the signal red light flash, and will stop
recording data; the existing data files will not be overwritten.

Static data download

Receiver file management uses U disk storage, plug and play, direct drag and drop download.
To ensure data security using U disk memory, only static data download is possible and file
deletion of the data is not possible. To delete static data, you must use the control software
such as SurvCE or FieldGenius.
To download, use a USB data cable to connect the receiver and computer. Open the "static"
drive and there are two folders: log and gnss. 'log' folder contains files with log information
and the 'gnss' folder contains the static data files.
Download the static file need to modify the name and antenna high, the steps are:
(1) Select the static file, double-click the mouse;
(2) pop-up "file editing" dialog box, the name of the modified and high antenna input,
To "update" upgrade disk, remove the U disk, unplug the data cable, restart the receiver to
complete the upgrade.

NFC function

Near field communication (NFC) technology applications is a new generation of intelligent
connection to control applications and can achieve two functions: instrument connection and
software start-up. Touch to automatically connect the device through Bluetooth and start the
software. This process simplifies the connection process but needs to be supported by the
control application being used.
14