Battery Installation; Working Mode Setting - SatLab SL800 User Manual

`

Battery Installation

Figure 2-4 Battery compartment
(1) Press cover catch up to open battery compartment.
(2) Align the battery electrode with the electrode of the battery compartment and gently
push it until it is flush with the battery compartment.
(3) Reinstall the battery cover to complete the battery installation.

Working mode setting

Double-click the power button to enter the work mode switch. Each double-click will cycle
between static mode and RTK mode. In static mode, the signal green light is off, the signal red
light blinks at the sampling interval. In RTK mode, the signal green light is on, the signal red
light will flash according to the differential data interval.
You can also set the working mode using SurvCE or FieldGenius software. See Chapter 3.
12