Installation Environment - Mitsubishi Electric AJ65BTS-RPH User Manual

(8) Connecting the cable to the spring clamp terminal block
(a) Connecting the cable
While pressing the open/close button with a flat-head screwdriver,
insert the cable into the insertion hole.
1) For use of bar terminals, the cable can be inserted without pressing
the open/close button.
(b) Disconnecting the cable
While fully pressing the open/close button with the flat-head
screwdriver, pull out the cable.

4.2.2 Installation environment

For installation environment, refer to Section 3.1.
Open/close Open/close Open/close
button button button
25
Insertion hole