Mitsubishi Electric AJ65BTS-RPH User Manual page 23

*1 Indicates the location where the device is connected from the public
cable network to the device structure wiring area.
Category II applies to the devices to which the power is supplied from
a fixed equipment. Surge withstand voltage for devices with up to
300V of rated voltage is 2500V.
*2 This is an index which indicates the degree of conductive object
generation in the environment Pollution level 2 is when only non-
conductive pollution occurs.
A temporary conductivity caused by condensation must be expected
occasionally.
*3 Do not use or store the PLC in the environment where the pressure is
higher than the atmospheric pressure at sea level.
Otherwise, malfunction may result.To use the PLC in a high-pressure
environment, contact your local Mitsubishi representative.
*4 It can also be installed to any other than a control panel if the
conditions such as operating ambient temperature and humidity are
satisfied.
13