Lenovo ThinkStation P500 Configuration Manual page 7

How to create and configure raid arrays

Hide thumbs Also See for ThinkStation P500:

14. The user will then be returned to the RSTe menu. The array should now be listed under RAID

Volumes and the disks that are part of the array listed under Physical Devices.

UEFI BIOS Method

Use this method to create a basic RAID array using the onboard Intel S-SATA controller with the system

BIOS set to UEFI mode (OS Optimized Defaults set to 'Enabled' or Storage CSM Configuration is set to

'UEFI').

1. Install the drives for the RAID array into the system (see "How to Utilize Intel S-SATA controller"

section above for installation instructions).

P500/P510

P700/P710